[HELP] Problems after flashing firmware in FlashTool

Hi, guys!
My phone was in a state of brick. Then, flashing the firmware. After finishing, I checked the phone and was like new. So I decided to install a different firmware to the first mentioned.

Information:
-----Xperia E4, E2104
-----Sony Mobile Flasher 0.9.19.0
-----E2104_Movistar MX_1292-5154_24.0.A.5.14_R10A
-----E2104_Commercial and Journalists_1293-7153_24.0.A.1.36_R1A
-Windows 7

Ah... Ok. Let's go.
-After my carelessness, the phone went again been brick. I disconnected the phone from the PC, and noticed that the screen is not lit or vibrating. He could only see the faint gleam of the proximity sensor.
-The PC does not recognize the phone, only the LED lights red. Its battery was 89%, I put charging enough for the LED lights green.
-After disconnecting the phone, proximity sensor is on. So I have to use the emergency button to return to turn off the phone completely.
-The only sign of life in my Xperia is only the reaction of the proximity sensor and the LED illuminated red.

I think they are all the details to my problem, I hope you can help me.
PD: The Google Translator is bad.

Show Accepted Answer

Guest Quick Reply (No URL, BBcode or HTML)

Last post by jamison39
2 hours ago
Last post by wsmitham
3 hours ago
Last post by nick.rodriguez
23 minutes ago
Last post by josianne.bahringer
2 hours ago
Last post by bradly.rowe
3 hours ago